{"id":524,"date":"2017-02-17T10:16:54","date_gmt":"2017-02-17T10:16:54","guid":{"rendered":"http:\/\/www.cerecdigest.net\/?p=524"},"modified":"2017-07-28T16:37:16","modified_gmt":"2017-07-28T16:37:16","slug":"biomimetic-crown-transfer123","status":"publish","type":"post","link":"https:\/\/www.cerecdigest.net\/2017\/02\/17\/biomimetic-crown-transfer123\/","title":{"rendered":"Biomimetic Crown Transfer"},"content":{"rendered":"
A while back, a member of our study club came across a case report by Pascal Magne titled:<\/p>\n
An approach to biomimetics: the natural CAD\/CAM restoration: a clinical report.<\/a><\/p><\/blockquote>\nThe report basically involved tricking the digital system to mill a real molar into the shape of a crown restoration. The idea seemed pretty awesome, because what restoration material can be better than our own biological enamel?<\/p>\nThe method does not seem particularly difficult, so that got me thinking:<\/p>\nDoes our clinic use the same system (CEREC)? Check<\/strong>.<\/p>\nDo we have spare milling blocks lying around? Check<\/strong>.<\/p>\nDo we have too much free time? Double<\/strong>\u00a0Check<\/strong>.<\/p>\nIs there practical clinical application? Who cares.<\/p>\nAll aboard the train of discovery!<\/p>\n\nThe Procedure<\/b><\/h1>\nThe donor tooth, which has been submerged in a hydrogen peroxide solution for an unknown period of time.<\/figcaption><\/figure>\n <\/p>\nThe donor tooth after trimming the root.<\/figcaption><\/figure>\n <\/p>\nWe opted for a crown preparation instead of an onlay. Unfortunately, this became problematic because the recipient site was wider near the margins than the donor tooth. This means that the margins on the final restoration would be smaller than our design.<\/figcaption><\/figure>\n <\/p>\nA second stone cast with the treatment site trimmed and fitted with the donor tooth.<\/figcaption><\/figure>\n <\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
The report basically involved tricking the digital system to mill a real molar into the shape of a crown restoration. The idea seemed pretty awesome, because what restoration material can be better than our own biological enamel?<\/p>\n
The method does not seem particularly difficult, so that got me thinking:<\/p>\n
Does our clinic use the same system (CEREC)? Check<\/strong>.<\/p>\nDo we have spare milling blocks lying around? Check<\/strong>.<\/p>\nDo we have too much free time? Double<\/strong>\u00a0Check<\/strong>.<\/p>\nIs there practical clinical application? Who cares.<\/p>\nAll aboard the train of discovery!<\/p>\n\nThe Procedure<\/b><\/h1>\nThe donor tooth, which has been submerged in a hydrogen peroxide solution for an unknown period of time.<\/figcaption><\/figure>\n <\/p>\nThe donor tooth after trimming the root.<\/figcaption><\/figure>\n <\/p>\nWe opted for a crown preparation instead of an onlay. Unfortunately, this became problematic because the recipient site was wider near the margins than the donor tooth. This means that the margins on the final restoration would be smaller than our design.<\/figcaption><\/figure>\n <\/p>\nA second stone cast with the treatment site trimmed and fitted with the donor tooth.<\/figcaption><\/figure>\n <\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
Do we have spare milling blocks lying around? Check<\/strong>.<\/p>\nDo we have too much free time? Double<\/strong>\u00a0Check<\/strong>.<\/p>\nIs there practical clinical application? Who cares.<\/p>\nAll aboard the train of discovery!<\/p>\n\nThe Procedure<\/b><\/h1>\nThe donor tooth, which has been submerged in a hydrogen peroxide solution for an unknown period of time.<\/figcaption><\/figure>\n <\/p>\nThe donor tooth after trimming the root.<\/figcaption><\/figure>\n <\/p>\nWe opted for a crown preparation instead of an onlay. Unfortunately, this became problematic because the recipient site was wider near the margins than the donor tooth. This means that the margins on the final restoration would be smaller than our design.<\/figcaption><\/figure>\n <\/p>\nA second stone cast with the treatment site trimmed and fitted with the donor tooth.<\/figcaption><\/figure>\n <\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
Do we have too much free time? Double<\/strong>\u00a0Check<\/strong>.<\/p>\nIs there practical clinical application? Who cares.<\/p>\nAll aboard the train of discovery!<\/p>\n\nThe Procedure<\/b><\/h1>\nThe donor tooth, which has been submerged in a hydrogen peroxide solution for an unknown period of time.<\/figcaption><\/figure>\n <\/p>\nThe donor tooth after trimming the root.<\/figcaption><\/figure>\n <\/p>\nWe opted for a crown preparation instead of an onlay. Unfortunately, this became problematic because the recipient site was wider near the margins than the donor tooth. This means that the margins on the final restoration would be smaller than our design.<\/figcaption><\/figure>\n <\/p>\nA second stone cast with the treatment site trimmed and fitted with the donor tooth.<\/figcaption><\/figure>\n <\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
Is there practical clinical application? Who cares.<\/p>\n
All aboard the train of discovery!<\/p>\n
<\/p>\nThe donor tooth after trimming the root.<\/figcaption><\/figure>\n <\/p>\nWe opted for a crown preparation instead of an onlay. Unfortunately, this became problematic because the recipient site was wider near the margins than the donor tooth. This means that the margins on the final restoration would be smaller than our design.<\/figcaption><\/figure>\n <\/p>\nA second stone cast with the treatment site trimmed and fitted with the donor tooth.<\/figcaption><\/figure>\n <\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nWe opted for a crown preparation instead of an onlay. Unfortunately, this became problematic because the recipient site was wider near the margins than the donor tooth. This means that the margins on the final restoration would be smaller than our design.<\/figcaption><\/figure>\n <\/p>\nA second stone cast with the treatment site trimmed and fitted with the donor tooth.<\/figcaption><\/figure>\n <\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nA second stone cast with the treatment site trimmed and fitted with the donor tooth.<\/figcaption><\/figure>\n <\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nThis configuration was scanned to create the reference BioCopy.<\/figcaption><\/figure>\n <\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nBiocopy (brown) with restoration design (white) overlay.<\/figcaption><\/figure>\n <\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nLast step of the restoration design process before milling.<\/figcaption><\/figure>\n <\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nEnsuring that our special block is large enough to accommodate the donor tooth. One of the plates would later be removed.<\/figcaption><\/figure>\n <\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nSilicone impression of the milled restoration.<\/figcaption><\/figure>\n <\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nThe silicone impression was used as a positional guide for the donor tooth and the block handle.<\/figcaption><\/figure>\n <\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nWith their positions determined, the donor tooth was bonded onto the special block with resin cement.<\/figcaption><\/figure>\n <\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nIn this case, there is no such thing as too much cement.<\/figcaption><\/figure>\n <\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nNow, the moment of truth.<\/figcaption><\/figure>\n <\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nThe finished product. Notice the chipping on the lingual margins, which was due to the aforementioned size difference between the donor tooth and the recipient site.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nFinished biomimetic restoration: occlusal view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nFinished biomimetic restoration: lingual view.<\/figcaption><\/figure>\n <\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
<\/p>\nFinished biomimetic restoration: pretentious psuedo-artistic\u00a0view.<\/figcaption><\/figure>\n\nConclusion<\/h1>\nAlthough the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\nBiomimetic Crown Transfer - CEREC Digest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n\n\n\n\t\n\t\n\t\n
Although the current clinical application of this procedure is questionable, in this experiment we have shown that it is technically feasible. Now, the big question is whether enamel is, in fact, the better restorative solution to ceramics. If this is true, then there is no doubt in my mind that newer and revised iterations of this method will become viable in the future.<\/p>\n","protected":false},"excerpt":{"rendered":"
A little experiment to see how can you trick the machine to mill enamel?<\/p>\n","protected":false},"author":1,"featured_media":555,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"generate_page_header":"","footnotes":"","_jetpack_memberships_contains_paid_content":false},"categories":[37],"tags":[59],"yoast_head":"\n